How to Enhance Durability and Performance of Your Motorcycle’s Battery
The performance of your bike depends on the quality of the battery because the battery releases energy that makes the engine to run. Find out from your manufacturer the right model off the battery to buy for your bike if you need to replace the battery. The battery should be replaced after every three to five years because after this time its performance declines and makes it difficult for you to use the motorcycle. You have to replace the battery more often if you have been using the motorcycle to travel on long distances thus charging it frequently. Maintain the battery of your motorcycle correctly by using the following guidelines to extend its lifespan and functionality.
Clean and grease the battery terminals of your bike regularly. The battery’s terminals accumulate dirt, muck, and grit often. The terminals of the battery will eventually corrode because of the accumulated debris in them. You will be forced to change your battery more often, therefore, ensure that the battery terminals are cleaned and greased every time you take the motorcycle for servicing.
Turn off the motorcycle when you’re not using it for that the battery gets enough time to cool. The ventilation of the battery should be enough to boost the flow of air around it. The holes and pipes of the ventilation should be kept clear and open all the time. The running motorcycle makes the hydrogen gas to be released because the source of the debtor to the electrolyte hence the hydrogen gas has to leave the battery through the vents. Blocked pipes or vents lead to accumulation of hydrogen gas which is harmful. When hydrogen gas accumulates to the right amount it is highly flammable and explosive therefore it can lead to the battery exploding.
Ensure the rubber strap that holds the battery in place is where it is supposed to be because it prevents the battery from moving around in the mounting bracket when you corner the motorcycle. You run the risk of your battery cracking or the mixture of water and acid spilling if the battery is not firmly held in place. You will have to repair the damaged paint and parts of your bike and also get treatment from accidental burns of spills of the mixture of water and acid.
There should be an adequate amount of electrolyte in the battery always. Top up the electrolyte with water that is distilled regularly. The impurities in tap water such as traces of minerals and metals will make the battery cells to rust or react with the electrolyte. Adding acid to the battery will destroy it. The battery will last longer when you charge it fully before using it anytime it discharges.